5 Common Mistakes To Keep Away From When Putting In Customized Curtain Rods
Installing customized curtain rods can elevate the look of any room, adding a touch of style and personalization. Nevertheless, it’s not so simple as just drilling a few holes and hanging up your curtains. Small mistakes can lead to crooked Iron Rods, curtains that don’t hold properly, or even damage to your walls. To save lots of your self from frustration and further work, here are five common mistakes to keep away from when installing custom curtain rods.
1. Neglecting to Measure Properly
One of the biggest mistakes folks make is skipping the measurement step or doing it incorrectly. Curtain rods need to be positioned at a precise height and width to ensure the curtains look balanced and functional.
- Why It’s a Problem: For those who don’t measure accurately, your curtains might end up being too brief, too long, or not wide sufficient to cover the window.
- Learn how to Avoid It: Use a tape measure to determine the height where you want your rod to sit. Typically, rods needs to be put in 4-6 inches above the window frame for a taller room appearance. Also, extend the rod three-6 inches beyond the window frame on either side to permit for full curtain coverage and smooth opening.
2. Selecting the Unsuitable Hardware
Not all curtain rods and brackets are created equal. Deciding on the mistaken hardware can lead to instability or difficulty in hanging your curtains.
- Why It’s a Problem: Heavy curtains on flimsy rods can cause the rod to sag and even collapse. Equally, using the improper type of screws or wall anchors can result in rods pulling out of the wall over time.
- Methods to Keep away from It: Check the weight of your curtains and select rods that can assist them. For heavy drapes, go for sturdy rods with reinforced brackets. When you’re putting in into drywall, use appropriate anchors to make sure a secure hold.
3. Ignoring Wall Material
Not all walls are the identical, and the type of wall you’re working with determines the set up approach and tools required.
- Why It’s a Problem: Failing to consider wall material can lead to unstable installations. For example, nails or screws inserted directly into drywall without anchors will likely loosen over time.
- Easy methods to Keep away from It: Establish whether your wall is drywall, plaster, concrete, or wood. For drywall, always use anchors. For concrete walls, you’ll want a masonry drill bit and anchors. Tailoring your approach to the wall materials ensures a secure and long-lasting installation.
4. Hanging the Rod Too Low
It’s tempting to put in curtain rods just above the window frame, however this mistake can make your room look smaller and the window seem shorter.
- Why It’s a Problem: Curtains which are hung too low can visually lower off the height of your room, making it really feel cramped and less inviting.
- Tips on how to Keep away from It: Always intention to hang the curtain rod higher than the window frame—typically four-6 inches above, or even closer to the ceiling for a dramatic effect. This trick draws the eye upward and makes your ceilings appear taller.
5. Forgetting to Level the Rod
A crooked curtain rod can destroy the overall aesthetic of your room, irrespective of how beautiful the curtains are.
- Why It’s a Problem: Uneven rods make curtains dangle awkwardly, which is discoverable and unattractive.
- The best way to Keep away from It: Always use a level before drilling or attaching brackets. Mark your measurements on the wall with a pencil and double-check for accuracy. Even a slight tilt can be discoverable, so take your time to make sure perfection.
Bonus Suggestions for a Flawless Curtain Rod Set up:
- Pre-Check Your Curtains: Earlier than putting in the rod, make positive the curtain length and style match your deliberate rod height and width.
- Use a Template: If installing a number of rods, create a template to make sure uniform placement throughout the house.
- Consider Aesthetic: Match the rod style and finish to your room’s decor for a cohesive look.
Putting in custom curtain rods doesn’t have to be a hassle. By avoiding these common mistakes and following the guidelines above, you possibly can achieve a refined, professional-looking outcome that enhances your space. A little further time spent on preparation and attention to element will prevent from headaches down the road and provides your home windows the proper frame they deserve.